; indications.conf
; Configuration file for location specific tone indications
; used by the pbx_indications module.
;
; NOTE:
;    When adding countries to this file, please keep them in alphabetical
;    order according to the 2-character country codes!
;
; The [general] category is for certain global variables.
; All other categories are interpreted as location specific indications
;
;
[general]
country=us		; default location


; [example]
; description = string
;      The full name of your country, in English.
; alias = iso[,iso]*
;      List of other countries 2-letter iso codes, which have the same
;      tone indications.
; ringcadence = num[,num]*
;      List of durations the physical bell rings.
; dial = tonelist
;      Set of tones to be played when one picks up the hook.
; busy = tonelist
;      Set of tones played when the receiving end is busy.
; congestion = tonelist
;      Set of tones played when there is some congestion (on the network?)
; callwaiting = tonelist
;      Set of tones played when there is a call waiting in the background.
; dialrecall = tonelist
;      Not well defined; many phone systems play a recall dial tone after hook
;      flash.
; record = tonelist
;      Set of tones played when call recording is in progress.
; info = tonelist
;      Set of tones played with special information messages (e.g., "number is
;      out of service")
; 'name' = tonelist
;      Every other variable will be available as a shortcut for the "PlayList" command
;      but will not be used automatically by Asterisk.
;
;
; The tonelist itself is defined by a comma-separated sequence of elements.
; Each element consist of a frequency (f) with an optional duration (in ms)
; attached to it (f/duration). The frequency component may be a mixture of two
; frequencies (f1+f2) or a frequency modulated by another frequency (f1*f2).
; The implicit modulation depth is fixed at 90%, though.
; If the list element starts with a !, that element is NOT repeated,
; therefore, only if all elements start with !, the tonelist is time-limited,
; all others will repeat indefinitely.
;
; concisely:
;   element = [!]freq[+|*freq2][/duration]
;   tonelist = element[,element]*
;
; Please note that SPACES ARE NOT ALLOWED in tone lists!
;

[at]
description = Austria
ringcadence = 1000,5000
; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
dial = 420
busy = 420/400,0/400
ring = 420/1000,0/5000
congestion = 420/200,0/200
callwaiting = 420/40,0/1960
dialrecall = 420
; RECORDTONE - not specified
record = 1400/80,0/14920
info = 950/330,1450/330,1850/330,0/1000
stutter = 380+420

[au]
description = Australia
; Reference http://www.acif.org.au/__data/page/3303/S002_2001.pdf
; Normal Ring
ringcadence = 400,200,400,2000
; Distinctive Ring 1 - Forwarded Calls
; 400,400,200,200,400,1400
; Distinctive Ring 2 - Selective Ring 2 + Operator + Recall
; 400,400,200,2000
; Distinctive Ring 3 - Multiple Subscriber Number 1
; 200,200,400,2200
; Distinctive Ring 4 - Selective Ring 1 + Centrex
; 400,2600
; Distinctive Ring 5 - Selective Ring 3
; 400,400,200,400,200,1400
; Distinctive Ring 6 - Multiple Subscriber Number 2
; 200,400,200,200,400,1600
; Distinctive Ring 7 - Multiple Subscriber Number 3 + Data Privacy
; 200,400,200,400,200,1600
; Tones
dial = 413+438
busy = 425/375,0/375
ring = 413+438/400,0/200,413+438/400,0/2000
; XXX Congestion: Should reduce by 10 db every other cadence XXX
congestion = 425/375,0/375,420/375,0/375
callwaiting = 425/200,0/200,425/200,0/4400
dialrecall = 413+438
; Record tone used for Call Intrusion/Recording or Conference
record = !425/1000,!0/15000,425/360,0/15000
info = 425/2500,0/500
; Other Australian Tones
; The STD "pips" indicate the call is not an untimed local call
std = !525/100,!0/100,!525/100,!0/100,!525/100,!0/100,!525/100,!0/100,!525/100
; Facility confirmation tone (eg. Call Forward Activated)
facility = 425
; Message Waiting "stutter" dialtone
stutter = 413+438/100,0/40
; Ringtone for calls to Telstra mobiles
ringmobile = 400+450/400,0/200,400+450/400,0/2000

[br]
description = Brazil
ringcadence = 1000,4000
dial = 425
busy = 425/250,0/250
ring = 425/1000,0/4000
congestion = 425/250,0/250,425/750,0/250
callwaiting = 425/50,0/1000
; Dialrecall not used in Brazil standard (using UK standard)
dialrecall = 350+440
; Record tone is not used in Brazil, use busy tone
record = 425/250,0/250
; Info not used in Brazil standard (using UK standard)
info = 950/330,1400/330,1800/330
stutter = 350+440

[be]
description = Belgium
; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
ringcadence = 1000,3000
dial = 425
busy = 425/500,0/500
ring = 425/1000,0/3000
congestion = 425/167,0/167
callwaiting = 1400/175,0/175,1400/175,0/3500
; DIALRECALL - not specified
dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440"
; RECORDTONE - not specified
record = 1400/500,0/15000
info = 900/330,1400/330,1800/330,0/1000
stutter = 425/1000,0/250

[ch]
description = Switzerland
; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
ringcadence = 1000,4000
dial = 425
busy = 425/500,0/500
ring = 425/1000,0/4000
congestion = 425/200,0/200
callwaiting = 425/200,0/200,425/200,0/4000
; DIALRECALL - not specified
dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
; RECORDTONE - not specified
record = 1400/80,0/15000
info = 950/330,1400/330,1800/330,0/1000
stutter = 425+340/1100,0/1100

[cl]
description = Chile
; According to specs from Telefonica CTC Chile
ringcadence = 1000,3000
dial = 400
busy = 400/500,0/500
ring = 400/1000,0/3000
congestion = 400/200,0/200
callwaiting = 400/250,0/8750
dialrecall = !400/100,!0/100,!400/100,!0/100,!400/100,!0/100,400
record = 1400/500,0/15000
info = 950/333,1400/333,1800/333,0/1000
stutter = !400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,400

[cn]
description = China
; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
ringcadence = 1000,4000
dial = 450
busy = 450/350,0/350
ring = 450/1000,0/4000
congestion = 450/700,0/700
callwaiting = 450/400,0/4000
dialrecall = 450
record = 950/400,0/10000
info = 450/100,0/100,450/100,0/100,450/100,0/100,450/400,0/400
; STUTTER - not specified
stutter = 450+425

[cz]
description = Czech Republic
; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
ringcadence = 1000,4000
dial = 425/330,0/330,425/660,0/660
busy = 425/330,0/330
ring = 425/1000,0/4000
congestion = 425/165,0/165
callwaiting = 425/330,0/9000
; DIALRECALL - not specified
dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425/330,0/330,425/660,0/660
; RECORDTONE - not specified
record = 1400/500,0/14000
info = 950/330,0/30,1400/330,0/30,1800/330,0/1000
; STUTTER - not specified
stutter = 425/450,0/50

[de]
description = Germany
; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
ringcadence = 1000,4000
dial = 425
busy = 425/480,0/480
ring = 425/1000,0/4000
congestion = 425/240,0/240
callwaiting = !425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,0
; DIALRECALL - not specified
dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
; RECORDTONE - not specified
record = 1400/80,0/15000
info = 950/330,1400/330,1800/330,0/1000
stutter = 425+400

[dk]
description = Denmark
; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
ringcadence = 1000,4000
dial = 425
busy = 425/500,0/500
ring = 425/1000,0/4000
congestion = 425/200,0/200
callwaiting = !425/200,!0/600,!425/200,!0/3000,!425/200,!0/200,!425/200,0
; DIALRECALL - not specified
dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
; RECORDTONE - not specified
record = 1400/80,0/15000
info = 950/330,1400/330,1800/330,0/1000
; STUTTER - not specified
stutter = 425/450,0/50

[ee]
description = Estonia
; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
ringcadence = 1000,4000
dial = 425
busy = 425/300,0/300
ring = 425/1000,0/4000
congestion = 425/200,0/200
; CALLWAIT not in accordance to ITU
callwaiting = 950/650,0/325,950/325,0/30,1400/1300,0/2600
; DIALRECALL - not specified
dialrecall = 425/650,0/25
; RECORDTONE - not specified
record = 1400/500,0/15000
; INFO not in accordance to ITU
info = 950/650,0/325,950/325,0/30,1400/1300,0/2600
; STUTTER not specified
stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425

[es]
description = Spain
ringcadence = 1500,3000
dial = 425
busy = 425/200,0/200
ring = 425/1500,0/3000
congestion = 425/200,0/200,425/200,0/200,425/200,0/600
callwaiting = 425/175,0/175,425/175,0/3500
dialrecall = !425/200,!0/200,!425/200,!0/200,!425/200,!0/200,425
record = 1400/500,0/15000
info = 950/330,0/1000
dialout = 500


[fi]
description = Finland
ringcadence = 1000,4000
dial = 425
busy = 425/300,0/300
ring = 425/1000,0/4000
congestion = 425/200,0/200
callwaiting = 425/150,0/150,425/150,0/8000
dialrecall = 425/650,0/25
record = 1400/500,0/15000
info = 950/650,0/325,950/325,0/30,1400/1300,0/2600
stutter = 425/650,0/25

[fr]
description = France
; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
ringcadence = 1500,3500
; Dialtone can also be 440+330
dial = 440
busy = 440/500,0/500
ring = 440/1500,0/3500
; CONGESTION - not specified
congestion = 440/250,0/250
callwait = 440/300,0/10000
; DIALRECALL - not specified
dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
; RECORDTONE - not specified
record = 1400/500,0/15000
info = !950/330,!1400/330,!1800/330
stutter = !440/100,!0/100,!440/100,!0/100,!440/100,!0/100,!440/100,!0/100,!440/100,!0/100,!440/100,!0/100,440

[gr]
description = Greece
ringcadence = 1000,4000
dial = 425/200,0/300,425/700,0/800
busy = 425/300,0/300
ring = 425/1000,0/4000
congestion = 425/200,0/200
callwaiting = 425/150,0/150,425/150,0/8000
dialrecall = 425/650,0/25
record = 1400/400,0/15000
info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0
stutter = 425/650,0/25

[hu]
description = Hungary
; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
ringcadence = 1250,3750
dial = 425
busy = 425/300,0/300
ring = 425/1250,0/3750
congestion = 425/300,0/300
callwaiting = 425/40,0/1960
dialrecall = 425+450
; RECORDTONE - not specified
record = 1400/400,0/15000
info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0
stutter = 350+375+400

[it]
description = Italy
; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
ringcadence = 1000,4000
dial = 425/200,0/200,425/600,0/1000
busy = 425/500,0/500
ring = 425/1000,0/4000
congestion = 425/200,0/200
callwaiting = 425/400,0/100,425/250,0/100,425/150,0/14000
dialrecall = 470/400,425/400
record = 1400/400,0/15000
info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0
stutter = 470/400,425/400

[lt]
description = Lithuania
ringcadence = 1000,4000
dial = 425
busy = 425/350,0/350
ring = 425/1000,0/4000
congestion = 425/200,0/200
callwaiting = 425/150,0/150,425/150,0/4000
; DIALRECALL - not specified
dialrecall = 425/500,0/50
; RECORDTONE - not specified
record = 1400/500,0/15000
info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0
; STUTTER - not specified
stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425

[mx]
description = Mexico
ringcadence = 2000,4000
dial = 425
busy = 425/250,0/250
ring = 425/1000,0/4000
congestion = 425/250,0/250
callwaiting = 425/200,0/600,425/200,0/10000
dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
record = 1400/500,0/15000
info = 950/330,0/30,1400/330,0/30,1800/330,0/1000
stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440

[nl]
description = Netherlands
; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
ringcadence = 1000,4000
; Most of these 425's can also be 450's
dial = 425
busy = 425/500,0/500
ring = 425/1000,0/4000
congestion = 425/250,0/250
callwaiting = 425/500,0/9500
; DIALRECALL - not specified
dialrecall = 425/500,0/50
; RECORDTONE - not specified
record = 1400/500,0/15000
info = 950/330,1400/330,1800/330,0/1000
stutter = 425/500,0/50

[no]
description = Norway
ringcadence = 1000,4000
dial = 425
busy = 425/500,0/500
ring = 425/1000,0/4000
congestion = 425/200,0/200
callwaiting = 425/200,0/600,425/200,0/10000
dialrecall = 470/400,425/400
record = 1400/400,0/15000
info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0
stutter = 470/400,425/400

[nz]
description = New Zealand
;NOTE - the ITU has different tonesets for NZ, but according to some residents there,
;      this is, indeed, the correct way to do it.
ringcadence = 400,200,400,2000
dial = 400
busy = 400/250,0/250
ring = 400+450/400,0/200,400+450/400,0/2000
congestion = 400/375,0/375
callwaiting = !400/200,!0/3000,!400/200,!0/3000,!400/200,!0/3000,!400/200
dialrecall = !400/100!0/100,!400/100,!0/100,!400/100,!0/100,400
record = 1400/425,0/15000
info = 400/750,0/100,400/750,0/100,400/750,0/100,400/750,0/400
stutter = !400/100!0/100,!400/100,!0/100,!400/100,!0/100,!400/100!0/100,!400/100,!0/100,!400/100,!0/100,400

[pl]
description = Poland
ringcadence = 1000,4000
dial = 425
busy = 425/500,0/500
ring = 425/1000,0/4000
congestion = 425/500,0/500
callwaiting = 425/150,0/150,425/150,0/4000
; DIALRECALL - not specified
dialrecall = 425/500,0/50
; RECORDTONE - not specified
record = 1400/500,0/15000
; 950/1400/1800 3x0.33 on 1.0 off  repeated 3 times 
info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000
; STUTTER - not specified
stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425

[pt]
description = Portugal
ringcadence = 1000,5000
dial = 425
busy = 425/500,0/500
ring = 425/1000,0/5000
congestion = 425/200,0/200
callwaiting = 440/300,0/10000
dialrecall = 425/1000,0/200
record = 1400/500,0/15000
info = 950/330,1400/330,1800/330,0/1000
stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425

[ru]
description = Russia / ex Soviet Union
ringcadence = 800,3200
dial = 425
busy = 425/350,0/350
ring = 425/800,0/3200
congestion = 425/350,0/350
callwaiting = 425/200,0/5000
dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
record = 1400/500,0/15000
info = !950/330,!1400/330,!1800/330,0

[se]
description = Sweden
ringcadence = 1000,5000
dial = 425
busy = 425/250,0/250
ring = 425/1000,0/5000
congestion = 425/250,0/750
callwaiting = 425/200,0/500,425/200,0/9100
dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
record = 1400/500,0/15000
info = !950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,0
stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425
; stutter = 425/320,0/20        ; Real swedish standard, not used for now

[sg]
description = Singapore
; Singapore
; Reference: http://www.ida.gov.sg/idaweb/doc/download/I397/ida_ts_pstn1_i4r2.pdf 
; Frequency specs are:   425 Hz +/- 20Hz; 24 Hz +/- 2Hz; modulation depth 100%; SIT +/- 50Hz
ringcadence = 400,200,400,2000
dial        = 425
ring        = 425*24/400,0/200,425*24/400,0/2000     ; modulation should be 100%, not 90%
busy        = 425/750,0/750
congestion  = 425/250,0/250
callwaiting = 425*24/300,0/200,425*24/300,0/3200
stutter     = !425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,425
info        = 950/330,1400/330,1800/330,0/1000       ; not currently in use acc. to reference
dialrecall  = 425*24/500,0/500,425/500,0/2500        ; unspecified in IDA reference, use repeating Holding Tone A,B
record      = 1400/500,0/15000                       ; unspecified in IDA reference, use 0.5s tone every 15s
; additionally defined in reference
nutone      = 425/2500,0/500
intrusion   = 425/250,0/2000
warning     = 425/624,0/4376                         ; end of period tone, warning
acceptance  = 425/125,0/125
holdinga    = !425*24/500,!0/500                     ; followed by holdingb
holdingb    = !425/500,!0/2500

[uk]
description = United Kingdom
ringcadence = 400,200,400,2000
; These are the official tones taken from BT SIN350. The actual tones
; used by BT include some volume differences so sound slightly different
; from Asterisk-generated ones.
dial = 350+440
; Special dial is the intermittent dial tone heard when, for example,
; you have a divert active on the line
specialdial = 350+440/750,440/750
; Busy is also called "Engaged"
busy = 400/375,0/375
; "Congestion" is the Beep-bip engaged tone
congestion = 400/400,0/350,400/225,0/525
; "Special Congestion" is not used by BT very often if at all
specialcongestion = 400/200,1004/300
unobtainable = 400
ring = 400+450/400,0/200,400+450/400,0/2000
callwaiting = 400/100,0/4000
; BT seem to use "Special Call Waiting" rather than just "Call Waiting" tones
specialcallwaiting = 400/250,0/250,400/250,0/250,400/250,0/5000
; "Pips" used by BT on payphones. (Sounds wrong, but this is what BT claim it
; is and I've not used a payphone for years)
creditexpired = 400/125,0/125
; These two are used to confirm/reject service requests on exchanges that
; don't do voice announcements.
confirm = 1400
switching = 400/200,0/400,400/2000,0/400
; This is the three rising tones Doo-dah-dee "Special Information Tone",
; usually followed by the BT woman saying an appropriate message.
info = 950/330,0/15,1400/330,0/15,1800/330,0/1000
; Not listed in SIN350
record = 1400/500,0/60000
stutter = 350+440/750,440/750

[us]
description = United States / North America
ringcadence = 2000,4000
dial = 350+440
busy = 480+620/500,0/500
ring = 440+480/2000,0/4000
congestion = 480+620/250,0/250
callwaiting = 440/300,0/10000
dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
record = 1400/500,0/15000
info = !950/330,!1400/330,!1800/330,0
stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440

[us-old]
description = United States Circa 1950/ North America
ringcadence = 2000,4000
dial = 600*120
busy = 500*100/500,0/500
ring = 420*40/2000,0/4000
congestion = 500*100/250,0/250
callwaiting = 440/300,0/10000
dialrecall = !600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,600*120
record = 1400/500,0/15000
info = !950/330,!1400/330,!1800/330,0
stutter = !600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,600*120

[tw]
description = Taiwan
; http://nemesis.lonestar.org/reference/telecom/signaling/dialtone.html
; http://nemesis.lonestar.org/reference/telecom/signaling/busy.html
; http://www.iproducts.com.tw/ee/kylink/06ky-1000a.htm
; http://www.pbx-manufacturer.com/ky120dx.htm
; http://www.nettwerked.net/tones.txt
; http://www.cisco.com/univercd/cc/td/doc/product/tel_pswt/vco_prod/taiw_sup/taiw2.htm
;
; busy tone 480+620Hz 0.5 sec. on ,0.5 sec. off
; reorder tone 480+620Hz 0.25 sec. on,0.25 sec. off
; ringing tone 440+480Hz 1 sec. on ,2 sec. off
;
ringcadence = 1000,4000
dial = 350+440
busy = 480+620/500,0/500
ring = 440+480/1000,0/2000
congestion = 480+620/250,0/250
callwaiting = 350+440/250,0/250,350+440/250,0/3250
dialrecall = 300/1500,0/500
record = 1400/500,0/15000
info = !950/330,!1400/330,!1800/330,0
stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440

[za]
description = South Africa
; http://www.cisco.com/univercd/cc/td/doc/product/tel_pswt/vco_prod/safr_sup/saf02.htm
; (definitions for other countries can also be found there)
; Note, though, that South Africa uses two switch types in their network --
; Alcatel switches -- mainly in the Western Cape, and Siemens elsewhere.
; The former use 383+417 in dial, ringback etc.  The latter use 400*33
; I've provided both, uncomment the ones you prefer
ringcadence = 400,200,400,2000
; dial/ring/callwaiting for the Siemens switches:
dial = 400*33
ring = 400*33/400,0/200,400*33/400,0/2000
callwaiting = 400*33/250,0/250,400*33/250,0/250,400*33/250,0/250,400*33/250,0/250
; dial/ring/callwaiting for the Alcatel switches:
; dial = 383+417
; ring = 383+417/400,0/200,383+417/400,0/2000
; callwaiting = 383+417/250,0/250,383+417/250,0/250,383+417/250,0/250,383+417/250,0/250
congestion = 400/250,0/250
busy = 400/500,0/500
dialrecall = 350+440
; XXX Not sure about the RECORDTONE
record = 1400/500,0/10000
info = 950/330,1400/330,1800/330,0/330
stutter = !400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,400*33
